Crowcon - Detecting Gas Saving Lives

Food and Beverage Industry


The food and beverage industry includes all companies involved in processing raw food materials, as well as those packaging and distributing them. This includes fresh, prepared foods as well as packaged foods, and both alcoholic and non-alcoholic beverages.

The food and beverage industry is divided into two major segments, which are the production and the distribution of edible goods. The first group, production, includes the processing of meats and cheeses and the creation of soft drinks, alcoholic beverages, packaged foods, and other modified foods. Any product meant for human consumption, aside from pharmaceuticals, passes through this sector. Production also covers the processing of meats, cheeses and packaged foods, dairy and alcoholic beverages. The production sector excludes foods and fresh produce that are directly produced via farming, as these fall under agriculture.

Global companies operating in food and beverage include Coca-Cola, Pepsico, Nestle, Danone and Asahi, many of which have manufacturing facilities worldwide to cater for local markets.

Food processing can be further divided into three sub-groups. Primary food processing is the conversion of raw food into commodities, e.g. milling wheat into flour and turning milk to cheese. Secondary food processing turns the ingredients into edibles, e.g. turning wheat into bread. Tertiary food processing is the commercial production of ready-to-eat foods, for example frozen pizza, instant meals, etc.

The manufacture and processing of food and beverages create substantial risks of fire and toxic gas exposure. Many gases are used for baking, processing and refrigerating foods. These gases can be highly hazardous – either toxic, flammable, or both.


Food Processing
Chemical Disinfection
Food Packaging
Refrigeration Facilities
Brewing and Drinks Industry
Packaging, Transport and Dispensing

Secondary food processing methods involve fermentation, heating, chilling, dehydration or cooking of some kind. This section focuses on secondary food processing, as this is where most of the gas hazards are found.

Many types of commercial food processing involve cooking, especially with industrial steam boilers. Steam boilers are usually gas-fired (natural gas or LPG) or use a combination of gas and fuel oil. For gas-fired steam boilers, natural gas consists mainly of methane (CH4), a highly combustible gas, lighter than air, which is piped directly into boilers.

In contrast, LPG consists mainly of propane (C3H8), and usually requires an on-site fuel storage tank. Whenever flammable gases are used on site, forced mechanical ventilation must be included in storage areas, in case of leakage. Such ventilation is usually triggered by gas detectors that are installed near boilers and in storage rooms.

In addition to safety considerations around handling pressurized equipment, boiler rooms must be protected from fire. OSHA boiler safety guidelines recommend that gas detection systems be implemented for any gas-powered equipment (> 2MW). The system should be designed to trigger alarms and relay contacts if gas hazards are detected.

A gas detection system is required for any gas-powered structure and for underground/basement boiler rooms. This gas detection system will trigger alarms and actuators in case of any gas leak. It will also shut down the gas and power supply, except that required for devices intended to operate in explosive atmospheres, low voltage power and emergency lighting.

Crowcon offers gas detection solutions for flammable hazards and to protect personnel from fire and explosion. Crowcon’s flammable gas detectors are rated for use in hazardous and safe areas, to suit different applications.

Crowcon controllers can be used to trigger audible alarms and visible beacons to alert personnel to a possible gas leak. In addition, output from controllers can be used to alert a central control room or building management system (BMS).

The F&B industry takes hygiene very seriously, as the slightest contamination of surfaces and equipment may provide an ideal breeding ground for all kinds of germs. The F&B sector therefore demands rigorous cleaning and disinfection, which must meet industry standards.

There are three methods of disinfection commonly used in F&B: thermal, radiation and chemical.

Chemical disinfection with chlorine-based compounds is by far the most common and effective way to disinfect equipment or other surfaces. This is because chlorine-based compounds are inexpensive, fast acting and effective against a variety of microorganisms. Several different chlorine compounds are commonly used, namely hypochlorite, organic and inorganic chloramines, and chlorine dioxide. Sodium hypochlorite solution (NaOCl) is stored in tanks while chlorine dioxide (ClO2) gas is usually generated on site.

In any combination, chlorine compounds are hazardous and exposure to high concentrations of chlorine can cause severe health issues.

Chlorine gases are usually stored on site and a gas detection system should be installed, with a relay output to trigger ventilation fans once a high level of chlorine is detected.

Food packaging serves many purposes. It allows food to be transported and stored safely, protects food, indicates portion sizes and provides information about the product.

To keep food items safe for a long time, it is necessary to remove oxygen from the container because otherwise, oxidation will occur when the food comes into contact with oxygen. The presence of oxygen also promotes bacterial growth, which is harmful when consumed. However, if the package is flushed with nitrogen, the shelf life of packaged food can be extended.

Packagers often use nitrogen (N2) flushing methods for preserving and storing their products. Nitrogen is a non-reactive gas, non-odorous and non-toxic. It prevents oxidation of fresh food with sugars or fats, stops the growth of dangerous bacteria and inhibits spoilage. Lastly, it prevents packages from collapsing by creating a pressurized atmosphere. Nitrogen can be generated on site using generators, or delivered in cylinders. Gas generators are cost effective and provide an uninterrupted supply of gas.

Nitrogen is an asphyxiant, capable of displacing oxygen in air. Because it has no smell and is non-toxic, workers may not become aware of low oxygen conditions before it is too late. Oxygen levels below 19% will cause dizziness and loss of consciousness. To prevent this, oxygen content should be monitored with an electrochemical sensor.

Installing oxygen detectors in packaging areas ensures the safety of workers and early detection of leaks.

Refrigeration facilities in the F&B industry are used to keep food cool for long periods of time.

Large-scale food storage facilities often use cooling systems based on anhydrous ammonia (> 50% NH3), as it is efficient and economical. However, ammonia is both toxic and flammable; it is also lighter than air and fills up enclosed spaces rapidly. Ammonia can become flammable if released in an enclosed space where a source of ignition is present, or if a vessel of anhydrous ammonia is exposed to fire.  

Ammonia is detected with electro-chemical (toxic) and catalytic (flammable) sensor technology. Portable detection, including single- or multi-gas detectors, can monitor instantaneous and TWA exposure to toxic levels of NH3. Multi-gas personal monitors have been shown to improve workers’ safety where a low-range ppm for routine system surveys and flammable range is used during system maintenance.

Fixed detection systems include a combination of toxic- and flammable-level detectors connected to local control panels – these are usually supplied as part of a cooling system. Fixed systems can also be used for process over-rides and ventilation control. Detector placement should be carefully considered, as ammonia will fill up breathing spaces rapidly.

Once an archetypal example of manual production, the wine and brewing industries now incorporate sophisticated processes to ensure high levels of quality and efficient output.

In some cases, traditional approaches have been scaled up or are used under more stringent monitoring. Elsewhere, innovations such as nitrogen-pressurised canning/bottling have been introduced. Regardless of the approach used, appreciation and understanding of the associated gas hazards, and the need to protect workers from toxic gas exposure and asphyxiation risks, has grown.

Situations that generate gas hazards within wineries and breweries include:

  • CO2 from fermentation, chilling, blanketing and recovery.
  • Disinfectants such as ClO2, O3 and SO2 used for cleaning equipment.
  • Argon and N2 used as blanketing gases to create inert atmospheres.
  • NH3 from refrigeration equipment.
  • O2 monitoring is required in confined spaces.

Once wine is bottled and beer is packaged, they must be delivered to the relevant outlets. This commonly includes distribution companies, warehousing and in the case of breweries, draymen. Beer and soft drinks use carbon dioxide or a mix of carbon dioxide and nitrogen as a way of delivering a beverage to the ‘tap’. These gases also give beer a longer-lasting head and improve the quality and taste.

Even when the beverage is ready to deliver, gas-related hazards remain. Those arise in any activity at premises that contain compressed gas cylinders, due to the risk of increased carbon dioxide levels or depleted oxygen levels (due to high levels of nitrogen).

Carbon dioxide (CO2) occurs naturally in the atmosphere (0.04%). CO2 is colorless and odourless, heavier than air and if it escapes, will tend to sink to the floor. CO2 collects in cellars and at the bottom of containers and confined spaces such as tanks and silos. CO2 is generated in large amounts during fermentation. It is also injected into beverages during carbonation.

Products for Food and Beverage Industry

Portable Monitors

Portable 4-in-1 gas detector.

Find out more
Gas Pro

A multi gas detector offering 5 gas support as well as a dedicated pre-entry check mode and optional pump feature.

Find out more

A compact and fully ruggedised single gas detector for the toughest of industrial environments.

Find out more
Tetra 3

Compact, robust and easy-to-use diffusion based detector.

Find out more
Fixed Monitors

Fixed multi gas detector.

Find out more
Xgard Bright

Addressable fixed head detector with OLED display. Now available with MPS technology.

Find out more

Refrigerant detectors for safe area applications.

Find out more
Control panels

Compact, versatile and powerful gas detection control panel.

Find out more

Our most flexible gas controller package.

Find out more
Addressable controllers

Local non-intrusive operation & display with simultaneous live reading display and alarm functions via color LCD display.

Find out more

Industry Insights

Carbon Dioxide: What are the dangers in the Food and Beverage Industry?

Almost all industries must monitor gas hazards, with the food and beverage industry no exception. Although, there is a lack of awareness regarding the dangers of carbon dioxide (CO2) and the dangers those working in the industry face.

Read more
Food and Beverages – The Hidden Dangers From Production To Table

Over the 2019/20 period, 2.8% of all non-fatal workplace injuries occurred in the food and beverage manufacturing industry.

Ensuring Gas Detection and Compliance in the Delivery of Carbonated Drinks

The risks of CO2 and N2 are frequently overlooked. Read how Crowcon Connect allows each device to be clearly allowed to an individual, providing accurate, real-time data.

Read more