T4x a Compliance 4-gas monitor 

It is vital to ensure that the gas sensor you employ is fully optimised and reliable in the detection and accurate measurement of flammable gas and vapours, whatever environment or workplace it is within, is of the utmost importance. 

Fixed or portable? 

Gas detectors come in a range of different forms, most commonly they are known as fixed, portable or transportable, in which these devices are designed to meet the needs of the user and environment whilst protecting the safety of those within it.  

Fixed detectors are implemented as permanent fixtures within an environment to provide ongoing monitoring of plant and equipment. According to guidance from the Health and Safety Executive (HSE) these types of sensors are particularly helpful where there is the possibility of a leak into an enclosed or partially enclosed space which could lead to the accumulation of flammable gases. The International Gas Carrier Code (IGC Code) states that gas detection equipment should be installed to monitor the integrity of the environment that it is to monitor and should be tested in accordance with the recognised standards. This is to ensure that the fixed gas detection system operates effectively, timely and accurate calibration of the sensors is critical. 

Portable detectors normally come as a small, handheld device that can be used within smaller environments, confined spaces, to trace leaks or early warnings to the presence of flammable gas and vapour within hazardous areas. Transportable detectors are not handheld, but they are easily moved from place to place to act as a monitor ‘stand-in’ whilst a fixed sensor is undergoing maintenance. 

What is a compliance 4-gas monitor? 

Gas sensors are primarily optimised for detecting specific gases or vapours through design or calibration. It is desirable that a toxic gas sensor, for example one detecting carbon monoxide or hydrogen sulphide, provides an accurate indication of the target gas concentration rather than a response to another interfering compound. Personal safety monitors often combine several sensors for protecting the user against specific gas risks. However, a ‘Compliance 4-Gas monitor’ comprises sensors for measuring levels of carbon monoxide (CO) hydrogen sulphide (H2S), oxygen (O2) and flammable gases; normally methane (CH4) in one device.  

The T4x monitor with the ground-breaking MPS™ sensor is able to provide protection from CO, H2S, O2 risks with accurate measurement of multiple flammable gases and vapours utilising a basic methane calibration. 

Is there a need for a compliance 4-gas monitor? 

Many of the flammable gas sensors deployed in conventional monitors are optimized for detecting a specific gas or vapour through calibration but will respond to many other compounds. This is problematic and potentially dangerous as the gas concentration indicated by the sensor will not be accurate and may indicate a higher (or more dangerously) and lower concentration of gas/vapour than is present. With workers often potentially exposed to risks from multiple flammable gases and vapours within their workplace, it is incredibly important to ensure that they are protected through the implementation of an accurate and reliable sensor. 

How is the T4x portable 4-in-1 gas detector different? 

To ensure ongoing reliability and accuracy of the T4x detector. The detector utilises the  MPS™ (Molecular Property Spectrometry) Sensor functionality within its robust unit that provides a range of features to ensure safety. It offers protection against the four common gas hazards: carbon monoxide, hydrogen sulphide, flammable gases and oxygen depletion, whilst The T4x multi gas detector now comes with improved detection of pentane, hexane and other long chain hydrocarbons. It comprises a large single button and easy-to-follow menu system to enable ease of use for those wearing gloves, who’ve undergone minimal training. Tough, yet portable, the T4x detector features an integrated rubber boot and an optional clip-on filter that can be easily removed and replaced when needed. These features allow the sensors to remain protected even within the dirtiest environments, to ensure they can constant. 

A unique benefit to the T4x detector is that it ensures toxic gas exposure is calculated accurately throughout an entire shift, even if it is switched off momentarily, during a break or when travelling to another site. The TWA feature allows for uninterrupted and disrupted monitoring, So, when powering up, the detector begins again from zero, as if starting a new shift and ignores all previous measurements. The T4x allows the user the option to include previous measurements from within the correct time frame. The detector is not just reliable in terms of accurate detection and measurement of four gases, it is also dependable due to its battery life. It lasts for 18 hours and is useful for usage across multiple or longer shifts without requiring charging as regularly.  

During usage the T4 employs a handy ‘traffic light’ display offering constant visual assurance that it is operating soundly and conforming to the site bump test and calibration policy. The bright green and red Positive Safety LEDs are visible to all and, as a result, offer a quick, simple and comprehensive indication of the monitor’s status to both the user and others around them. 

T4x helps operations teams focus on more value adding tasks by reducing the number of sensor replacements by 75% and increasing sensor reliability. Through ensuring compliance across site T4x helps health and safety managers by eliminating the need to ensure each device is calibrated for the relevant flammable gas as it accurately detects 19 at once. Being poison resistant and with battery life doubled, operators are more likely to never be without a device. T4x reduces the 5-year total cost of ownership by over 25% and saves 12g of lead per detector which makes it much easier to recycle at the end of its life. 

Overall, through the combination of three sensors (including two new sensor technologies MPS and Long-life O2) within an already popular portable multi-gas detector. Crowcon allowed for the enhancement of safety, cost-effectiveness and efficiency of individual units and entire fleets. The new T4x offers longer life with a higher accuracy for gas hazard detection whilst providing a more sustainable build than ever before.