During this challenging time, keeping your gas monitor clean is more important than ever to ensure you’re keeping yourself, and others, safe.
Cleaning your monitor
The following procedure and precautions should be noted if you intend to clean your Crowcon gas monitor to protect against COVID-19 transmission.
Gas monitors contain sensors that may be affected by the chemicals in cleaning compounds. In general Crowcon recommends cleaning with mild soap and a soft cloth taking care not to introduce excessive amounts of liquid into the product/sensors.
Alcohol-based cleaning products may cause a temporary response on some electrochemical sensors; potentially leading to false-alarms. It is recommended monitors are switched-off before cleaning and not switched back on until the alcohol has fully evaporated.
Cleaning agents that contain chlorine and/or silicones must be avoided, especially on monitors that contain pellistor-type flammable gas sensors as these compounds will ‘poison’ the sensor leading to permanent loss of sensitivity to gas.
Where gas monitor cleaning regimes are introduced or increased Crowcon strongly recommends that sensors are bump tested with the target gas periodically to ensure that sensors remain operational. Pellistor-type sensors in portable monitors should be tested every day before use as prescribed in the European standard EN60079-29 Part 1.
It is extremely likely that any viral agent could get trapped within the pump or filters within an instrument. Maintenance procedures should continue to be performed as described in the Operation and Maintenance Manual for the product and in-line with operating company policy.
For more information on how to keep you or your business safe during the COVID19 pandemic, get in touch and we’d be more than happy to help.