Introduction
Fire and gas mapping service is the first step to delivering a site’s ideal fixed gas detection system.
Health and safety managers are increasingly required to demonstrate the rationale behind the selection and design of the safety systems deployed on their sites. Greater assurance is needed to confirm that the installed safety systems provide the intended levels of area coverage and protection.
Fire and gas mapping provides this by offering an evidence-based approach to fixed gas detection, helping organisations justify their decisions with confidence.
Designing the Optimal Gas Detection System
Many variables need to be considered when designing fixed gas detection systems. These include:
- The model of gas detector with the appropriate sensor
- The number of detectors needed
- Their location relative to likely hazard sources across the site
A strong system balances safety and practicality. It delivers protection for site personnel without over-engineering a solution that could introduce unnecessary complexity or costs. Fire and gas mapping helps strike this balance by aligning detector placement and system design with real site layout drawings and risk profiles.
Accounting for Gas Behaviour and Sensor Performance
Different gases behave in different ways, and these physical properties play a critical role in detector placement. Lighter gases that rise, such as hydrogen (H2), must be detected closer to the ceiling, while heavier gases require detection closer to ground level. In addition, sensors designed to detect different gases have varying recommended detection ranges. These factors must be carefully considered to ensure that gas leaks are detected quickly and reliably, regardless of location or gas type. Fire and gas mapping brings these considerations together into a cohesive design strategy, ensuring detector coverage is both technical sound and appropriate for the hazards present.
Crowcon’s Fire and Gas Mapping Service
Crowcon’s fire and gas mapping service can provide a detailed report based on 3D site images which identifies gas and flame hazards and recommends detector quantities and locations in line with the British Standard BS 60080:2020.
The resulting report creates a clear, auditable paper trail documenting the hazard detection design, clearly showing coverage and justifying engineering decisions. This documentation can be submitted to insurance companies and health and safety executives to demonstrate a considered, standards‑based design, making it a valuable tool for HSE managers to evidence due diligence and the care taken to manage site risk.
Upon the completion of a fire and gas mapping service, Crowcon can consequently recommend gas detectors within their product range that match the requirements outlined by the report. Crowcon draws from over 50 years of experience in designing and building fixed gas detection systems. We have adapted to the evolving demands of our customers and have conducted fire and gas mapping services throughout the UK to deliver site-specific safety solutions.
Speak to the Engineered Fixed Systems department at Crowcon to receive a quote for fire and gas mapping at your site.
Subscribe to get the
latest insights
in your inbox
Read about Crowcon‘s Privacy and Cookie policy here. If you change your mind, you can unsubscribe at any time