Gas-Pro PID

Overview

Gas-Pro PID utilises the Photo Ionization Detection technology to allow you to detect hundreds of Volatile Organic Compounds (VOCs). If you are working in an environment that is high in levels of solvents, glues, paints and general VOCs, the Gas-Pro PID will monitor your safety. With its dual-coloured display, the monitor will alert the user with its 95db audible alarm and its dual-coloured visual alarm bars.

PID Technology

Crowcon’s PID works with a 10.6 electron volt lamp. This sensor is the most stable sensor on the market and offers the detection of a wide range of VOCs. The sensor has an internal UV light source, which the gas sample passes through. An electron is released for gases with an ionization potential of 10.6. 

User friendly:

  • Top mount display  – Makes it easy to read at a glance for quick decision-making
  • Simple single button operation – Limited training required
  • Ergonomically designed – Sits well when worn and fits easily in the hand

Flexibility:

  • Monitors 5 gases from many different options – Hundreds of variants to choose from
  • Pumped and diffusion solutions – Offers multiple uses within one compact detector
  • Multiple languages – Regionally configurable
  • Automatic fail-safe flow pump plate recognition – Simple to use and no tools required
  • Specific and unique Pre-Entry Check (PEC) mode – Takes away the pain of pre-entry testing
  • PID correction factor – Set to target VOCs

Reliability:

  • Broad range PID – Hundreds of gases detected
  • Water and dust resistant to IP65 and IP66 – Capable of withstanding harsh environments
  • Bump and calibration reminders  – Full compliance
  • Positive/+ve Safety – Full site compliance
  • Strong pump – Up to 30m sampling

Specifications

Size 43 x 130 x 84mm (1.7 x 5.1 x 3.3ins)
Weight 309g 4 gas (10.8oz)/ 340g pumped (11.9oz)
333g 5 gas (11.7oz)/ 362g pumped (12.7oz)
Alarms Audible >95dB @ 30cm (98dB @30cm in loud mode)
Visual – all angle dual red/blue LEDs
Vibrating alert
Display Top mount for ease of view with dual colour backlight (green/red)
Data logging 125hrs at 10-second intervals (45,000 logs)
Event logging Alarm, over range, calibration, bump, on/off, TWA, 1000 events
Battery Rechargeable Li-ion, >14 hours (13 hours pumped operation) based on CH4, O2, H2S, CO
Typical charge time 7.5 hours
Sampling Internal pump as option
Operating temperature -20°C to +55°C (-4°F to +131°F)
Storage -25°C to +65°C (-13°F to +149°F)
Humidity 10 to 95% RH
Ingress protection Independently tested to IP65
Approvals IECEx: Ex db ia IIC T4 Gb Tamb -20°C to +55°C
ATEX: II 2 G Ex db ia IIC T4 Gb Tamb -20°C to +55°C
UL: Class 1, Division 1, Groups A, B, C, and D UL 913, UL 60079-0 and UL 60079-11
INMETRO: Ex db ia IIC T4 Gb Tamb -20°C to +55°C
Marine Equipment Directive: MED 1500009
Compliance FCC and CE
Complies with EMC Directive 2014/30/EU
EN50270 and ICES-003
Interface Data connection for gas test solutions and direct to PC
Charging Direct connection to multiregional power supply
Vehicle charger adaptor
Desktop cradle
USB power and communications lead

 

Gases and Ranges

Gas Range Typical Alarms Resolution
PID  0-1000 ppm  50 ppm  1 ppm
Ammonia (NH3)  0-100 ppm  25 ppm  1 ppm
Carbon dioxide (CO2)  0-5% vol.  0-5% vol.  0.01% vol.
Carbon monoxide (CO)  0-2000 ppm  30 ppm  1 ppm
Carbon monoxide (CO)  0-500 ppm  30 ppm  1 ppm
Carbon monoxide
(hydrogen filtered)
 0-2000 ppm  30 ppm  1 ppm
Chlorine (Cl2)  0 – 5 ppm  0.5 ppm  0.1 ppm
Dual toxic (CO-H2S) H2S 0-100ppm
CO 0-500ppm
 5 ppm
30 ppm
 1 ppm
1 ppm
Flammable  0-100% LEL  20% LEL  1% LEL
Hydrogen sulphide (H2S)  0-100 ppm  5 ppm  1 ppm
Nitrogen dioxide (NO2)  0-20 ppm  1 ppm  0.5 ppm
Oxygen (O2)  0-25% vol.  19% / 23% vol.  0.1% vol.
Ozone (O3)  0-1 ppm  0.1 ppm  0.01 ppm
Sulphur dioxide (SO2)  0-20 ppm  1 ppm  0.1 ppm
Chlorine dioxide (ClO2)  0-1 ppm  0.1 ppm  0.1 ppm
Nitric oxide (NO)  0-100 ppm  25 ppm  1 ppm

Accessories

Below is a small selection of the accessories available for the Gas-Pro PID.

PID-A1 Sensor

SS0600

Gas-Pro PID Electrode Stack

SS0738

Gas-Pro PID Lamp 10.6 eV

SS0739

Cleaning Kit

C03664

Gas-Pro PID Stack Removal Tool

C03663

Downloads

Certificate

Datasheet

Manual

Videos

Basic Operation:

  Activation

Includes: Switching Gas-Pro on and sensor zero. Duration: 1m:11secs

Watch video

  Alarm

Includes: Explanation of Gas-Pro alarm display. Duration: 49secs

Watch video

  Home screen

Includes: Gas level display home screen. Duration: 32secs

Watch video

  Shutdown

Includes: Switching Gas-Pro off. Duration: 21secs

Watch video

  Charging

Includes: Using the Gas-Pro cradle charger and charging lead. Duration: 33secs

Watch video

  Backlight

Includes: Activating the display backlight. Duration: 19secs

Watch video

Advanced Features:

  Flow plate

Includes: Fit and remove the gas flow plate on Gas-Pro’s with internal pumps. Duration: 44secs

Watch video

  Pre-Entry Check

Includes: Conduct pre-entry gas checks for confined spaces using Gas-Pro. Duration: 1m:18secs

Watch video

  Quick view

Includes: View status information without switching Gas-Pro on. Duration: 29secs

Watch video

  TWA

Includes: View average toxic gas exposure measurements. Duration: 32secs

Watch video

  Peak review

Includes: Switch display to peak level readings. Duration: 46secs

Watch video

  Manual zeroing

Includes: Perform a sensor zero when in clean air. Duration: 32secs

Watch video

  Select user

Includes: Active user tracking. Duration: 49secs

Watch video

Bump Testing:

  Manual bump

Includes: Bump testing using the gas flow plate. Duration: 54secs

Watch video

Additional Information:

Gas-Pro user manuals and datasheets can be found in our downloads section.